790 kg
Standard block weight
We design and manufacture architectural facade panels, decorative elements, and custom GRC/GFRC structures — a material that combines exceptional strength, low weight, and virtually unlimited freedom of form and texture. Production strictly adheres to international GRCA standards.
Delivering the complete cycle: from structural calculations and engineering to manufacturing, logistics, and on-site facade installation.
Complete corrosion immunity,
high crack resistance, low maintenance
High freeze-thaw endurance (F300+), UV stability,weathering resistance
Complete corrosion immunity, high crack resistance,low maintenance
Full-body integrated pigmentation
(chips require no retouching)
| Requirement | Confirmation | Status |
|---|---|---|
| Anchors and fixings | Structural steel with anti-corrosion coating, or SS316 per project spec | Equivalent |
| Flexural strength (LOP/MOR) | Tested to ASTM C947 / EN 1170, meets project requirements | Equivalent |
| Frost resistance F150–F300 | No visible cracking after strength development, independently tested | Equivalent |
| Material density | Not less than 1,950 kg/m³ | Compliant |
| Fire resistance | Class NG, non-combustible, no additional coating required | Compliant |
| Surface finish | Sandblasted, acid-etched, polished, or smooth, per approved architectural sample | Optional |
| Curing | Controlled moist curing; concrete cured 24 hours at 30°C ±5°C | Compliant |
| Mock-ups | Surface samples and functional mock-up produced prior to production start | Compliant |
| Hydrophobic treatment | Available on request for improved moisture and soiling resistance | Optional |
| Installer experience | Crews with 10+ years GRC/UHPC experience, manufacturer-trained | Compliant |
| Warranty | 10-year warranty on works from substantial project completion | Compliant |
| Delivery and storage | Transported on unpainted cushioned supports, markings visible | Compliant |
| Glass fiber | Alkali-resistant, per GRCA specification | Equivalent |
See the Documents section below for the downloadable spec sheet and supporting test reports.
| Property | Value |
|---|---|
| Shell thickness | Nominal 6mm (±3mm); up to 20mm at edges depending on design |
| Fiberglass content | ≥6% by weight |
| Weight | 7–10 kg/m² |
| Flexural — modulus of rupture | 22–24 MPa |
| Flexural — modulus of elasticity | 8.963–13.1 × 10⁶ kPa |
| Tensile — ultimate strength | 12–14 MPa |
| Tensile — modulus of elasticity | 18.62–26.2 × 10⁶ kPa |
| Compressive strength | 49.64–57.23 MPa |
| Thermal conductivity | 22.7–23.8 W/m²·°C |
| Thermal expansion coefficient | 14 × 10⁻⁶ mm/mm/°C |
| Fire resistance | NG (non-combustible), fuel = 0, smoke = 0 |
| Toxicity | Non-toxic |
| Density | 1,680–1,826 kg/m³ |
| Hardness | 95 HRC min (Rockwell scale) |
| Manufacturing tolerance | ±3mm all directions; warping ±5mm/1m; square/skew/diagonal ±12mm/1m |
| Installation tolerance | Max 3mm moisture-related deviation (industry standard) |
See the Documents section below for the downloadable spec sheet.
Seamless 3D surfaces, flawless smooth finish, high detail accuracy
High flexural strength, zero shrinkage, crack-resistant
100% eco-friendly, non-toxic, natural indoor moisture regulation
Ready for premium paint/plaster coating or full-body pigmented
| Property | Value |
|---|---|
| Shell thickness | Nominal 6mm (±3mm); up to 20mm at edges depending on design |
| Fiberglass content | ≥6% by weight |
| Weight | 7–10 kg/m² |
| Flexural — modulus of rupture | 22–24 MPa |
| Flexural — modulus of elasticity | 8.963–13.1 × 10⁶ kPa |
| Tensile — ultimate strength | 12–14 MPa |
| Tensile — modulus of elasticity | 18.62–26.2 × 10⁶ kPa |
| Compressive strength | 49.64–57.23 MPa |
| Thermal conductivity | 22.7–23.8 W/m²·°C |
| Thermal expansion coefficient | 14 × 10⁻⁶ mm/mm/°C |
| Fire resistance | NG (non-combustible), fuel = 0, smoke = 0 |
| Toxicity | Non-toxic |
| Density | 1,680–1,826 kg/m³ |
| Hardness | 95 HRC min (Rockwell scale) |
| Manufacturing tolerance | ±3mm all directions; warping ±5mm/1m; square/skew/diagonal ±12mm/1m |
| Installation tolerance | Max 3mm moisture-related deviation (industry standard) |
See the Documents section below for the downloadable spec sheet.
Block types produces
Standard block size
(W x H x D)
Standard block weight
Ready to scale. Production of SALBEN BLOCK expands with demand — including custom block types and dimensions developed to project specification
Compressive Strength
Flexural Strength (Wet)
Tensile Strength
Post -Freeze /Thaw Retention
Fiber & Anchor Reinforcement
Materials & Workmanship Warranty
Our founding factory, operating since 2004. Alongside Astana, it forms part of a unified engineering system serving projects across Kazakhstan and the CIS.
Our second production facility, extending SALBEN's manufacturing capacity and operating under the same engineering standards and quality oversight as Almaty.
Specialists
Annual production capacity
Founded (Almaty)
Temperatire range
Seismic activity
(MSK scale, Almaty region)
Proprietary mix and fixing systems developed in the field
SALBEN Group supports projects from concept to completion.
Our engineering team works directly with architects, structural engineers, and site managers to ensure
that every GRC/GFRC element is designed, produced, delivered, and installed correctly.
We do not simply manufacture panels and hand them over. We are a project partner.
Facade-grade fiber-reinforced concrete is reshaping how cities look —
combining architectural freedom with proven performance in the CIS's harshest climates.
Salben controls every stage of production, from lab formulation to final sealing,
delivering consistent geometry and a facade built to last 50+ years.
